
Common mistakes when choosing composite fencing
Most disappointing composite fences were chosen badly rather than built badly. These are the decisions we see go wrong most often – and what to do instead.
Is choosing colour from a small sample a mistake?
In short: yes, if you ignore sun, orientation and ageing – colour looks different on a long run in full sun and changes over time.
A small sample indoors tells you little about a long fence in Andalusian sun. Colours look lighter outdoors, dark boards get hot, and most composites lighten over the years. Look at a finished fence of the same board if possible, think about where the sun falls and ask how the colour is expected to age. Our guide on composite in strong sun explains why.
Why is buying boards separately from the system risky?
In short: boards, posts, rails and fixings are designed together; mixing them causes bowing, loose bays and gaps.
A board designed for a particular post channel or clip may not fit, or may not move correctly, in another system. Post spacing, gap sizes and fixings all assume the original components. Owners who buy boards from one place and posts from another often end up with a fence that looks right on day one and wrong after the first summer.
If you want to supply your own material, buy a complete system and keep the installation instructions. We will check it before we start.
What happens if you ignore the base of the fence?
In short: the bottom board stays damp, stains and grows mould, and dogs dig under it.
The bottom of a fence is where problems start: wet soil, mulch, sprinklers and digging dogs. Choosing a fence without thinking about the base is one of the most common mistakes. A composite fence on a low wall solves it most completely; a base board on a post-based fence solves much of it at lower cost.
Why check rules before choosing?
In short: because the town hall or community may dictate height, solidity, colour or material – and it is cheaper to know first.
Urbanisations along the coast often have rules on what can be seen from the street, and the *ayuntamiento* sets the authorisation and limits through its planning rules. Choosing a tall, dark, closed fence and then finding the community does not allow it is an expensive way to learn. Check first; our main site's guide on urbanisation rules explains what to look for.
Is underestimating wind a real problem?
In short: yes – a closed composite screen acts like a sail, and light posts or shallow footings lead to leaning fences.
Closed fences give the most privacy and also catch the most wind. Choosing the tallest, most closed design without considering exposure – a hillside plot, a corner open to the sea – puts all the load on the posts. Either the structure must be designed for it or a more open design chosen. Our article on what can go wrong during the build shows how it plays out.
Why is comparing quotes on price alone a mistake?
In short: because quotes often include different things – footings, removal, trims – and only an itemised quote shows that.
The lowest figure is not the cheapest fence if it leaves out footings, removal of the old fence or caps and trims. Ask for itemised quotes and compare line by line. The guide on comparing quotes on our price site lists what to check.
Articles and guides
What can go wrong while building a composite fence?
A composite fence is a simple structure, but there are several points in the build where a shortcut becomes a problem later. Knowing them helps you ask the right questions before work starts.
View details →
Composite fence on a low wall
The classic Costa del Sol villa front: a low wall with pillars, and composite boards filling the bays between them. We build the wall, the pillars and the boards as one job.
View details →Composite fence with posts
A lighter way to build a composite screen: posts set in concrete footings with boards slotted or fixed between them. Ideal for rear gardens and side boundaries where a full wall is more than you need.
View details →
Composite fencing in strong sun
Sun is the main stress on any fence along the Costa del Sol. For composite it means colour change, surface heat and movement. Knowing what to expect makes it easier to choose the right board and colour.
View details →Frequently asked questions
What is the most common mistake with composite fences?
Ignoring the base: boards in contact with damp soil or mulch stain, grow mould and are easy for dogs to dig under.
Should I choose a dark colour?
Dark colours look striking but get hotter in sun and show fading and dust more. Mid tones are easier to live with on most sunny plots.
Can I mix boards and posts from different brands?
It is not recommended. Systems are designed as a whole, and mixing components can cause bowing and loose boards.
Do I need to check community rules?
Yes, many urbanisations regulate fences visible from the street. Check before ordering.
Is a taller fence always better for privacy?
Not always. A screen closer to where you sit can block the view with less height, and height may be restricted on the boundary.
Should I buy boards online to save money?
You can, but make sure you get a complete system with instructions. Missing components or the wrong fixings often cancel the saving.
Does it matter which way the fence faces?
Yes. South- and west-facing runs get the most sun, which affects heat, movement and colour change.
Is hollow composite a mistake?
Not necessarily. Hollow boards are designed for specific systems; problems arise when they are used beyond what the system allows.
How do I avoid choosing the wrong contractor?
Ask for an itemised quote, ask how the footings and gaps will be done, and check that the contractor builds the whole fence rather than only fitting boards.
Can a bad choice be corrected later?
Some can, such as adding a base board. Others, such as an unsuitable structure, usually mean rebuilding.
Planning a composite or timber fence?
Send photos and the approximate length by WhatsApp or the form. We reply with what to check and an itemised quote, no commitment.