Vallas Composite MálagaComposite & timber fencing
Panel / meshConcrete footingPostPanel / mesh
Posts + composite boards

Composite fence with posts

A lighter way to build a composite screen: posts set in concrete footings with boards slotted or fixed between them. Ideal for rear gardens and side boundaries where a full wall is more than you need.

A composite fence with posts is a fence in which wood-plastic composite boards are fitted between individual posts – usually aluminium, steel or composite-clad – each set in its own concrete footing, without a continuous masonry wall underneath.

What is a post-and-board composite fence?

In short: posts in individual concrete footings, with composite boards slotted into or fixed between them.

In most composite fence systems the posts are aluminium or steel profiles, sometimes clad in composite, with a channel on each side. The boards slide into the channels one above the other, and a top rail or cap closes each bay. Other systems fix the boards to the face of the posts with clips or brackets. Either way, the strength of the fence lives in the posts and their footings.

There is no continuous wall below, so the job is quicker in the ground and adapts more easily to gardens with planting, roots or services near the line. The fence can still have a base: some systems use a concrete gravel board or a composite kick board at the bottom so that the lowest board stays clear of the soil.

For a closer look at the material itself, read our guide on what composite fencing is.

Where does a post-based fence make sense?

In short: rear and side gardens, boundaries partly hidden by planting, and anywhere you need privacy without heavy groundwork.

Post-based fences are the natural choice for the parts of a plot the street does not see: the back of the garden, the side passage, the line between your terrace and a neighbour's. They also suit gardens where the soil cannot be disturbed much – near established trees, irrigation runs or a pool area (where the fence is a privacy screen, not a pool safety barrier).

They are less suitable for:

  • dogs that dig, unless a solid base board or buried barrier is added
  • street fronts where the urbanisation expects a wall with infill
  • very exposed positions where the posts and footings would need special design

If any of those apply, compare with a composite fence on a low wall.

Dark vertical textured slats screwed to rails beside a block pillar
Dark vertical textured slats screwed to rails beside a block pillar

Why do posts and footings matter so much?

In short: a closed board fence catches the wind like a sail, so the posts and their footings carry the whole fence.

A solid composite screen does not let wind through. All the force on the boards is passed to the posts, and from the posts to the footings. If a post is too light, set too shallow or set in loose fill, the fence starts to lean – and composite boards in a leaning bay tend to bind and bow.

We size posts and footings according to the board system's instructions, the height of the fence and the ground we find when we dig. We do not use generic figures: the manufacturer's data sheet and what is under the surface decide. Where the ground is made-up fill, which is common on terraced plots along the coast, we dig until we reach something solid or tell you if that is not possible.

Our article on what can go wrong while building a composite fence covers the post problems we see most often.

What should you check before ordering?

In short: the boundary line, the neighbour, any community rules and what lies under the ground along the fence.

  • The boundary (*lindero*): know where the plot ends. On a shared line, agree the position and the finished side with the neighbour.
  • Permits: the *ayuntamiento* decides which authorisation applies to your fence. Our main site's permit guide explains the process.
  • Community rules: some urbanisations restrict height, colour or solid fences on certain sides.
  • Services: irrigation pipes, cables and drainage often run near boundaries. Mark what you know before we start digging footings.

How do you look after it?

In short: wash the boards occasionally, keep soil and mulch off the bottom board, and check the caps and fixings once in a while.

Composite boards do not need oiling, but the bottom of a post-based fence is the part that suffers: mulch, soil and sprinkler water against the lowest board encourage stains and mould. Keep a clear strip along the base if you can, and point sprinklers away from the fence.

Once a year it is worth looking along the fence for a lifted cap, a loose board or a post that has moved. Our guides on cleaning and stains and on expansion gaps explain what is normal and what is not.

What affects the cost?

In short: length, height, post type and spacing, footings, the ground and access – we list each item separately.

Without a wall, the posts, footings and boards make up most of the job. Taller fences need stronger posts and larger footings, and difficult ground – rock, roots or loose fill – changes the excavation. Access matters too: a rear garden reachable only through the house is a different job from one with a side gate.

The full list of factors is below. For a broader explanation of fence quotes, see presupuestovalla.eu.

BR
Bauman Raymond Attila
Author and person responsible · Last reviewed:
How we build it – step by step

How we build it – step by step

  1. Setting out

    We mark the line and every post position, checking levels and the final height with you.

  2. Clearing and removal

    We clear the fence line and remove any old fence included in the job.

  3. Excavating post holes

    We dig each footing to suit the board system's instructions and the ground we find.

  4. Setting the posts

    We set the posts in concrete, plumb and in line, and let the concrete gain strength before loading them.

  5. Base board

    Where the design includes one, we fit the base or kick board to keep the composite clear of the soil.

  6. Fitting boards

    We slide or fix the composite boards bay by bay, leaving the movement gaps the manufacturer requires.

  7. Caps and trims

    We fit top rails, post caps and end trims, and check every bay for line and fixing.

  8. Cleaning and handover

    We clean the site and hand over, with photos at each stage for owners abroad.

When is it the right choice – and when not?

When is it the right choice – and when not?

A good fit if…

  • Rear and side garden boundaries
  • Privacy between terraces and neighbours
  • Gardens with planting, roots or services near the line
  • Owners who want composite without a full wall
  • Lines that may need changing in the future

Consider another option if…

  • Dogs that dig, unless a solid base is added
  • Street fronts where a wall is expected
  • Boundaries that retain soil
  • Very exposed sites without specific design of posts and footings
What affects the cost?

What affects the cost?

We don't publish fixed prices: every fence is quoted line by line using these factors.

  • Linear metres of fence
  • Fence height
  • Post type, size and spacing
  • Footing size and ground conditions
  • Composite board system
  • Base or kick board
  • Slope and stepping of the line
  • Access to the garden
  • Removal of an old fence and clearing
  • Licence or declaración responsable, if required

Fence cost calculator See how a fence quote is put together

Itemised quoteItemisedquoteLinear metresHeightPanel typeLow wall or notFoundationsGround & slopeAccessOld fence removalClearingPermit
Our specialist sites by fence type
FAQ

Frequently asked questions

What are the posts made of?

In most composite systems the posts are aluminium or steel profiles, sometimes clad in composite. Timber posts are possible with timber boards but are not usually recommended with composite systems.

Do the posts need concrete footings?

Yes, a closed composite fence takes significant wind load, so each post needs a properly sized concrete footing. We size them according to the system's instructions and the ground.

Can you fix posts to an existing concrete slab or wall?

Sometimes, using base plates bolted down, if the slab or wall is sound and thick enough. We check on site before proposing it.

Will the fence lean in strong wind?

Not if the posts and footings are correctly sized and set in firm ground. Leaning fences are almost always caused by light posts, shallow footings or loose fill.

Can you build it on a slope?

Yes, by stepping the fence in level bays. Each step needs careful setting out so the steps are even along the line.

Does it keep dogs in?

It keeps most dogs in, but dogs that dig can get under it unless there is a solid base board or another barrier at ground level.

Is it cheaper than a fence on a wall?

Usually it involves less groundwork and masonry, but the final cost depends on height, ground and access. We quote both options itemised if you are unsure.

Can I add more bays later?

Usually yes, if the same board system is still available. Colours can vary between production batches, so we recommend buying the whole fence at once where possible.

Do you build gates in the same system?

We do not offer gates. We can leave a prepared opening with suitable posts for a gate supplied by a specialist.

How do I start?

Send photos of the line and the approximate length in linear metres. We tell you what we still need to check, then prepare an itemised quote with no commitment.

Get a quote

Planning a composite or timber fence?

Send photos and the approximate length by WhatsApp or the form. We reply with what to check and an itemised quote, no commitment.