
Composite fencing in strong sun
Sun is the main stress on any fence along the Costa del Sol. For composite it means colour change, surface heat and movement. Knowing what to expect makes it easier to choose the right board and colour.
Does composite fade in the sun?
In short: most composite boards lighten over time outdoors; capped boards and pigments are designed to slow this.
The US Forest Products Laboratory states that most WPCs tend to lighten over time, and that laboratory UV exposure lightened test composites. It also notes that colour change can reach below the surface. Manufacturers respond by adding pigments and UV stabilisers, or by co-extruding a UV-stable plastic cap around the core.
What this means in practice: expect some change in colour over the years, more on south- and west-facing runs, and less with capped boards. A fence that is evenly exposed tends to change evenly; a fence partly shaded by a tree may age in patches. Manufacturers usually describe expected colour change in their documentation – ask to see it before choosing.

How hot does a composite fence get?
In short: hot enough in full summer sun to matter where people, children or pets touch it – and darker colours get hotter.
Any solid material in direct sun heats up, and darker surfaces absorb more sunlight than lighter ones. A dark composite screen beside a terrace or a play area can become uncomfortable to touch on a summer afternoon. We do not quote surface temperatures; they depend on colour, orientation, wind and the board itself, and manufacturers' data vary.
Where a fence will be touched – along a path, next to a sun lounger, in a dog run – a mid or light tone is the more comfortable choice. Our article on composite fences with dogs and children looks at this from a family's point of view.
Why does heat make boards move?
In short: the plastic in composite expands with heat, so boards in strong sun grow in length and need room to do so.
Heat is the main driver of composite movement. Boards in full sun expand more than shaded ones, and dark boards more than light ones. The fixing system has to allow for this with the gaps the manufacturer specifies. Our guide on expansion gaps explains where those gaps go and what happens without them.
How should you choose a colour for a sunny plot?
In short: consider orientation, who touches the fence, what the community allows and how the colour will look as it lightens.
A practical way to choose:
- Orientation: south- and west-facing runs get the most sun; consider a lighter tone there.
- Use: fences next to seating, play areas or dog runs benefit from cooler colours.
- Community rules: some urbanisations specify colours for anything visible from the street.
- Ageing: ask how the colour is expected to change; a grey or brown that lightens slightly often looks more natural than a very dark board that fades.
- The house: match or contrast with window frames, render and paving rather than choosing in isolation.
The fences on our composite privacy screens and composite on a low wall pages show how colour works with walls and pillars.
How does timber compare in strong sun?
In short: timber greys and dries faster unless it is coated, but it can be refinished – composite cannot.
Uncoated wood turns grey in the sun and develops surface checks as it dries. A stain or oil slows this, but needs renewing. The advantage of timber is that it can be cleaned, sanded and re-coated to look new; composite colour change is essentially permanent. For a full comparison see timber or composite fence?.
What design choices help in strong sun?
In short: capped boards, sensible colours, correct gaps, and a structure that lets air move around the fence.
Beyond colour and board type, a few details help: leaving air space behind boards where the system allows, not building composite tight against a sun-heated wall, and using caps and trims that cover gaps without trapping heat. Shade from planting helps comfort but can encourage mould on the shaded side, so balance it with good drainage. See cleaning and stains for the upkeep side.
Official sources
Articles and guides

Expansion gaps in composite fences
Composite boards grow and shrink with temperature. On a hot Costa del Sol afternoon that movement is real, and a fence built without room for it will show it. Here is why gaps matter.
View details →
Composite privacy screens
Sometimes the problem is not the whole boundary but one view: a neighbour's terrace, a window, a path above the garden. A composite privacy screen closes that view with a solid, warm-looking run of boards.
View details →
Composite fence on a low wall
The classic Costa del Sol villa front: a low wall with pillars, and composite boards filling the bays between them. We build the wall, the pillars and the boards as one job.
View details →
Composite fences for families with dogs and children
A family garden asks more of a fence: it has to keep a dog in, stand up to children, stay comfortable to touch and still give privacy. Here is how composite measures up – and where it needs help.
View details →Frequently asked questions
Will my composite fence change colour?
Most composite boards lighten over time outdoors, according to the US Forest Products Laboratory. Capped boards are designed to reduce this.
Is capped composite better for Spain?
For colour stability in strong sun, a co-extruded cap is designed to help. Check the manufacturer's information on colour change for any board.
Which colour stays coolest?
Lighter colours absorb less sunlight than darker ones, so they generally stay cooler in direct sun.
Can a composite fence burn a dog's paws or a child's hand?
A dark fence in full summer sun can get uncomfortably hot to touch. Choose lighter tones where contact is likely.
Does fading affect strength?
Colour change is mainly a surface effect, but research notes it can extend below the surface. Structural problems usually come from fixing and posts rather than fading.
Does a south-facing fence age faster?
In the northern hemisphere, south- and west-facing surfaces get the most sun, so they generally show colour change first.
Will new boards match old ones later?
Not exactly. New boards will look different from weathered ones, so we recommend buying the whole fence from one batch.
Can I stop composite fading with a coating?
Most manufacturers do not recommend coating composite. Choose a board designed for UV exposure instead.
Does sun affect timber more than composite?
Uncoated timber greys and checks faster, but it can be refinished. Composite changes more slowly but cannot be restored the same way.
Do you have a colour you recommend?
We suggest mid tones for most sunny plots, but the right choice depends on your house, community rules and how the fence will be used.
Planning a composite or timber fence?
Send photos and the approximate length by WhatsApp or the form. We reply with what to check and an itemised quote, no commitment.